Toolland VL6000, Руководство пользователя

Страница: 10 / 53

VL6000
V. 01
–
05/06/2015 10 ©Velleman nv
Note the following to keep your chain sharpener functioning:

Clean and oil all moving parts regularly (except for the drive system).

Remove dust and dirt with a cloth or brush.

Clean the vent slots after each use.

Clean the machine only dry.

Do not use solvents for the synthetic parts (petrol, alcohol, etc.) as these can damage the
synthetic parts.

Never use any grease! Use environmentally-acceptable spray oil.
11.2 Storage
Pull out the main plug.

Store unused equipment in a dry, locked place out of the reach of children.

Thoroughly clean the device before extended storage.
12. Possible Faults
Before each fault clearance:

Switch off the device

Wait for the shutdown of the grinding wheel

Pull out the main plug
Fault Possible cause Remedy
Chain sharpener does not operate

No power

Check power supply, power
socket and fuse protection

Extension cable defective

Check extension cable,
exchange defective cable
immediately

Main plug, motor switch
defective

Have motor or switch checked
by an approved electrician or
replaced by original spare
parts
Chain sharpener grinds with
interruptions

Extension cable defective

Check extension cable,
exchange defective cable
immediately

Internal fault

Please contact your official
dealer

On-off switch defective

Please contact your official
dealer
Grinding wheel becomes hot

Grinding wheel is dull or
defective

Replace the grinding wheel
Motor is humming, grinding wheel
stops

Grinding wheel is blocked

Remove object
Unusual vibrations

Grinding wheel is defective

Replace grinding wheel
13. General Guidelines
Refer to the Velleman
®
Service and Quality Warranty on the last pages of this manual.
14. Features

5 cutting angles

stone 100 x 10 x 4.5 mm (included)

options (not included):
o
spare stone 100 x 10 x 3.2 mm (order n° EHBE777 )
o
spare stone 100 x 10 x 4.5 mm (order n° EHBE999 )