@ToolkitRC 2021
18
Measure the voltage of a fully-charged battery pack
using a multimeter. Use the roller to select Input, then
scroll until the value matches what was measured on the
multimeter. Scroll down to save and press down on the
roller to save. Repeat this process for each individual cell
if needed. When finished, scroll to the exit option and
press down on the roller to finish the calibration.
Input: Voltage measured at the main XT60 port.
1-8: Voltage of each individual cell.
ADC: Original value of the selected option prior to calib
Exit: Exit calibration mode
Save: Save calibration data
Defau.: Return to default settings
===================================
1，Only use multimeters with 0.001V accuracy to
perform calibrations. If the multimeter is not
accurate enough, do not perform calibration.
===================================
