background image

 

 

Thank you for choosing 596365 Digital Display Hand Pallet 

Truck

Please read this operation manual before use.   

Note

596365  Digital  Weight  Scale  hand  pallet  truck

is  used  for  weight 

distinguish in storage, has the features of promotion and demotion stable, control 
portable, safe and reliable. It is used on hardness and flatness ground. It is also 
can be used for handbarrow

 

Note

1.Usage,  maintain  and  service  should  meet  the  requirement  of 

manufacturers. 

2.  Not  allowed  to  retrofit  or  install  any  attachment.  In  order  to  assure 

safety. 

1

Applicability

 

1.1 596365 Digital Weight Scale hand pallet truck

is used for weight distinguish in storage, 

has the features of promotion and demotion stable, control portable, safe and reliable.

 

1.2

 

The working place must be non-slip, hard and flat ground without holes or obstacles 

1.3

 

The ambience lighting is 50 lux at least 

1.4

 

turning radius is 1216-1336mm 

2.

Main parameter

 

Capacity                                               

Kg

 

2500 

Maximum lift height                          (mm) 

200/190 

Lowered fork lift                                    (mm) 

85/75 

Height of handles                              (mm) 

494/484 

Fork length                                              (mm) 

1100/1150/1220 

Width over the forks                              (mm) 

520/550/685 

Steering wheel diameter                        (mm) 

Ф

200/

Ф

180 

Fork wheel diameter                              (mm) 

Ф

80/

Ф

74 

Noise lever                                                (Kg) 

Service weight                                          (Kg) 

62-70 

3. Assembly of hand pallet truck 

3.1  Trucks  will  remove  the  handle  when  transportation.  So  customers  should  assemble  the 
truck after purchase

 

3.2 See fig 1, pull out the pin roll 1, and then pull out pin roll 2

 

3.3 Insert the hand grip 3 to place A. Couple the hand grip 3 and pump body 4 with pin roll 2

 

Содержание 596365









Отзывы: