Operating Elements
180°
180°
90°
90°
1
12
1
2
3
4
5
6
7
8
9
10
11
1 Lens cover
2 Lamp head adjust lock
3 Upper arm
4 Lower arm
5 DC input jack
6 Lamp attachment plug
7 Clamp socket
8 Base clamp
9 Clamp screw
10 Lens
11 LED ring light
12 Power ON/OFF
Installation
The lamp arms (3) and (4) are spring loaded, open carefully when removing from
packaging. Make sure not to trap your fingers and hands when adjusting them.
Do not use force to over tighten the clamp screw (9) as this may damage the base
clamp (8) and surface it is attached to.
Ensure that the surface attached to the desk clamp has parallel edges. The desk
clamp must not be attached to desks with chamfered or tapered edges.
Make sure the lamp is securely held in place before letting go.
The jaws on the base clamp (8) may leave marks or scratch sensitive surfaces.
a) Attach Clamp
• Loosen the clamp screw (9).
• Slide the clamp onto the horizontal surface.
• Tighten the clamp screw.
b) Connect Lamp to Base
• Insert the lamp attachment plug (6) into the clamp socket (7).
• Gently check to make sure the connection is secure before letting go.
Operation
The upper arm (3) and lower arm (4) are spring loaded and can be adjusted within
the specified ranges. Over adjusting or using excessive force may cause damage.
Please hold the base clamp (8) while making adjustments to prevent the lamp from
falling over.
• Connect the power adaptor cable to the DC input jack (5) and the other end to a mains power
supply.
• Flip the lens cover (1) open.
• Touch the power ON/OFF (12) button to turn the LED ring light (11) ON/OFF.
Touch and hold the power (12) button to increase/decrease brightness.
• Adjust the lamp head to the desired position.
• Close the lens cover (1) after use.
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights
including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represents the technical status at the time of printing.
Copyright 2022 by Conrad Electronic SE.
*2475114_v2_0422_02_dh_mh_en
Care and cleaning
• Always disconnect the product from the power supply before cleaning it.
• Remove loose particles from the lens with clean compressed air.
• Clean the surface of the lens with a lens cloth or a soft, lint-free cloth.
• Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these could
damage the housing or stop the product from functioning properly.
Disposal
This symbol must appear on any electrical and electronic equipment placed on the
EU market. This symbol indicates that this device should not be disposed of as
unsorted municipal waste at the end of its service life.
Owners of WEEE shall dispose of it separately from unsorted municipal waste. Spent batteries
and accumulators, which are not enclosed by the WEEE, as well as lamps that can be removed
from the WEEE in a non-destructive manner, must be removed by end users from the WEEE in
a non-destructive manner before it is handed over to a collection point.
Distributors of electrical and electronic equipment are legally obliged to provide free takeback
of waste. Conrad provides the following return options free of charge (more details on our
website):
• in our Conrad offices
• at the Conrad collection points
• at the collection points of public waste management authorities or the collection points set up
by manufacturers or distributors within the meaning of the ElektroG
End users are responsible for deleting personal data from the WEEE to be disposed of. It
should be noted that different obligations about the return or recycling of WEEE may apply in
countries outside of Germany.
Technical data
a) General
Operating voltage ......................... 12 V/DC, max 9 W
Material ......................................... Lamp: ABS, Aluminum Alloy, Steel
Clamp: ABS
Protection class ............................ III
Clamp ........................................... max. 44 mm
Dimmable ..................................... Yes
Light controls ................................ Capacitive touch
Lens size ...................................... ø110 mm
Diopter .......................................... 5D (2.25x)
Operating conditions ..................... 10 to 40 °C, 0 – 85 % relative humidity
Storage conditions ........................ 0 to 50 °C, 0 – 85 % relative humidity
Dimensions (W x H x D) ............... 180 x 1030 x 50 mm
Weight .......................................... 507 g (main unit), 81 g (clamp), 72 g (adapter)
b) LED
This product contains a light source of energy efficiency class F.
Quantity ........................................ 72 pcs
Type .............................................. SMD
Brightness ..................................... max. 850 lm
Lux ................................................ 3300 lux (magnifier glass focal length)
Colour temperature ....................... 6500 K
Life ................................................ 30000 h
Power ........................................... 8.5 W
c) Power adapter
Input voltage/current ..................... 100 - 240 V/AC, 50/60 Hz
Output voltage/current .................. 12 V/DC, 1000 mA
