background image

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). 

All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in 

electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. 

This publication represents the technical status at the time of printing.
Copyright 2020 by Conrad Electronic SE. 

  

*2250947_v1_0520_02_dh_m_en

• 

Never mount the product in the vicinity of easily flammable materials 

(i.e. curtains, fabrics, etc.). Make sure no object (e.g. curtain) can touch 

or come near the lamp head, for example due to a draught. Otherwise 

there is a risk of fire!

•  For installations in industrial facilities, follow the accident prevention 

regulations for electrical systems and equipment of the government 

safety organization or the corresponding authority for your country.

•  Consult an expert when in doubt about operation, safety or connection 

of the device.

• 

Maintenance, modifications and repairs are to be performed exclusively 

by an expert or at a qualified shop.

•  If you have questions which remain unanswered by these operating 

instructions, contact our technical support service or other technical 

personnel.

Installation

• Attach the clamp bracket to a suitable surface (e.g. table, work bench).
• Tighten the screw clamp, until the clamp bracket sits properly and cannot be 

moved anymore.

• 

Insert the foot of the magnifier lamp into the clamp bracket.

• Position the lamp head as desired and then secure it using the wing screw.

Operation

• Connect the power plug to a common household power outlet.
• Flip the lid upwards to open.
• Turn on the product (on/off switch to 

I

 position).

• Turn off the product after use (on/off switch to 

O

 position) and flip the lid down.

Cleaning and care

a) General

• Disconnect the product from the power supply before cleaning.
• Under no circumstances use aggressive cleanings agents, cleaning alcohol or other 

chemical solutions since these can penetrate the housing or impair functionality.

• The product does not require any maintenance, do not disassemble it. Have 

maintenance or repair services done by a specialist workshop only.

• 

Clean the product with a dry, fibre-free cloth.

• When cleaning, do not apply too much force on the lens or housing in order to 

avoid scratching.

• The LEDs are built-in and cannot be replaced.

b) Lens

• Turn the bayonet catch anti-clockwise.

• Remove the bayonet catch.

• Remove the lens.

• Use a lens cleaning cloth for cleaning the lens. Alternatively, use a dry, clean, soft 

and lint-free cloth or a dust brush. If necessary, you can moisten the cloth with a 

little lukewarm water.

• When cleaning the lens with a cleaning agent, make sure not to directly apply the 

cleaner on the lens. Always apply the cleaning agent directly to the cloth first.

• Replace the lens after cleaning. Turn the bayonet catch clockwise to secure the 

lens. The catch must lock into place.

Disposal

  Electronic devices are recyclable waste and must not be disposed of in the 

household waste. At the end of its service life, dispose of the product in 

accordance with applicable regulatory guidelines.

 

You thus fulfill your statutory obligations and contribute to the protection of 

the environment.

Technical data

Operating voltage ................... 220 – 240 V/AC, 50 Hz
Power consumption ................ 8 W
Illuminant ................................ 60 x 0.2 W SMD LED
Service life .............................. 25000 h

Luminous flux

 ......................... 700 lm

Colour temperature ................. 6500 K (cold-white)
Lens size ................................ Ø 127 mm (122 mm visible)

Magnification factor

 ................ 3x

Clamping range ...................... max. 50 mm
Protection type ........................ IP20
Operating conditions ............... -5 to +40 °C, <95 % RH
Storage conditions .................. -10 to +50 °C, <95 % RH
Dimensions (L x W x H) .......... 650 x 230 x 820 mm
Weight .................................... 2.26 kg

Содержание 2250947









Отзывы: