32
7. Setup and preparation
Switch the product off and remove battery pack before assembly, cleaning, adjustments, maintenance,
storage and transportation.
Always wear gloves when handling the product.
a) Installing bits
Due to the impact mechanism you should use only bits, which are designed for operation with impact
wrenches of greater or equal torque than the torque of the product.
Installation must be carried out when the battery is removed from the product to prevent injury.
The product cannot be used with standard drill bits.
The bits are not supplied with the product. Use bits with the chuck size of 12.7 mm (1/2 in).
Attach the bit onto the tool holder (3), push until the bit snaps into place (
Ú
Fig. 1).
Fig. 1
b) Assembling/changing the battery
The battery pack fits only one way. Do not force it into the battery holder.
1. Slide the battery pack into the battery holder until it “clicks” in place.
2. To remove the battery, hold the release button in the front of the battery and pull it out.
