30
g) Drill safety warnings
Safety instructions for all operations
• Wear ear protectors when drilling. Exposure to noise can cause hearing loss.
• Brace the tool properly before use. This tool produces a high output torque and without properly
bracing the tool during operation, loss of control may occur resulting in personal injury.
• Hold the power tool by insulated gripping surfaces, when performing an operation where the
cutting accessory or fasteners may contact hidden wiring. Cutting accessory contacting a “live” wire
may make exposed metal parts of the power tool “live” and could give the operator an electric shock.
Safety instructions when using long drill bits
• Never operate at higher speed than the maximum speed rating of the drill bit. At higher speeds, the
drill bit is likely to bend if allowed to rotate freely without contacting the workpiece, resulting in personal
injury.
• Always start drilling at low speed and with the drill bit tip in contact with the workpiece. At higher
speeds, the drill bit is likely to bend if allowed to rotate freely without contacting the workpiece, resulting
in personal injury.
• Apply pressure only in direct line with the drill bit and do not apply excessive pressure. Drill bits
can bend causing breakage or loss of control, resulting in personal injury.
h) Vibration and noise reduction
To reduce the impact of noise and vibration emission, limit the time of operation, use low vibration and
low-noise operating modes as well as wear personal protective equipment. Take the following points into
account to minimise the vibration and noise exposure risks:
• Only use the product as intended by its design and these instructions.
• Ensure that the product is in good condition and well maintained.
• Use correct accessory tools for the product and ensure they are in good condition.
• Keep tight grip on the handles/grip surface.
• Maintain this product in accordance with these instructions and keep it well lubricated (where appropriate).
• Plan your work schedule to spread any high vibration tool use across a longer period of time.
i) Behaviour in emergency situations
Familiarise yourself with the use of this product by means of this instruction manual. Memorise the safety
warnings and follow them to the letter. This will help to prevent risks and hazards.
• Always be alert when using this product, so that you can recognise and handle risks early. Fast
intervention can prevent serious injury and damage to property.
• Switch the product off and disconnect it from the mains if there are malfunctions. Have the product
checked by a qualified professional and repaired, if necessary, before you operate it again.
