TOOL WAREHOUSE WT03056, Оригинальное руководство пользователя

Страница: 11 / 15


Do not dispose of used batteries in the household waste. Consult your
local authority or dealership for details of recycling or disposal facilities.

Never dispose of battery pack in fire as this can lead to explosion. Never
attempt to open the battery pack.

Use only original replacement batteries. The use of other batteries can
lead to injury and / or damage to property.
Operation
Install and remove the battery pack
Fit a battery pack to the angle grinder and make sure that it is pushed all the
way into the battery holder
CAUTION:
• Always switch off the tool before installing or removing of the battery
cartridge.
• Hold the tool and the battery pack firmly when installing or removing battery
cartridge.
Failure to hold the tool and the battery cartridge firmly may cause them to slip
off your hands and result in damage to the tool and battery cartridge and a
personal injury.
To remove the battery cartridge, slide it from the tool while sliding the button
on the front of the cartridge.
To install the battery cartridge, align the tongue on the battery cartridge with
the groove in the housing and slip it into place. Insert it all the way until it locks
in place with a little click. If you can see the red indicator on the upper side of
the button, it is not locked completely.
1. Before operation
Fitting and removing the battery pack. Slide the
battery into the handle until it engages. To remove
the battery, hold down the battery pack release
button (A) and pull the battery pack out of the handle.
2. Charging the battery pack