Tool Shop 240-1575, Руководство пользователя

Страница: 11 / 15

OPERATION
2. Place the assembled frame upside-down onto the table
tops. Thread the pan-head wood screws (R) with
washers (S) through slots in the brace and into the five
holes in each tabletop.
NOTICE: The center screws lock the tabletops in position and
have one washer (S) on the screw head and one additional
washer (S) between the long upper cross brace and the
tabletop (Fig.9).
ASSEMBLING THE SHELF (Fig.10)
NOTICE:
The lower cross braces should be oriented so that
the flange extends from the lower portion of the cross base
cradle the lower shelf (refer to Fig.3a).
1. The shelf comes in two pieces (J). Slide one piece onto
the flange and underneath the cross brace bolts.
2. Slide the second piece onto other side.
APPLICATIONS (Fig.11)
WARNING:
Do not use the work station for scaffolding or as a ladder. Make sure to securely
tighten all fasteners before using. Maximum capacity is 500 lbs. Power tools on the work station
should not exceed a combined overall height of 60inches
from the floor.
To use the work station with a table saw, use the largest
opening so debris does not accumulate.
Drill holes as needed into the tabletop. Mount all power tool
with nuts and bolts (not supplied).
CAUTION:
Be careful not to drill the cross braces when
drilling holes.