TOOL KLEAN TK-1-SSRTT Скачать руководство пользователя страница 2

Страница: 2 / 6

You are ready to start your first treatment.
CAUTION: Make sure all animals and people are out
of the room and cover plants during treatment.
Set the tabletop on a flat surface or hang the unit by
its ring in a central location of the area you would
like to sanitize.
Plug the tabletop into a wall outlet or heavy-duty
extension cord.
Press the ON/OFF button on the unit or remote.
Press the button for the desired treatment time. The
unit will start to beep in quick succession as the
tabletop is ready to turn on. The 30-second delayed
start will allow time to leave the room.
Allow the tabletop to sanitize the area completely
before re-entering. The tabletop light will
automatically turn off when the timed cycle is
complete. Use the remote control to turn the light off
if access to the area is required before treatment is
completed.
If the light flickers, turn off and restart. Fluorescent
bulbs start slowly and may not fully turn on in cold
temperatures.
Always unplug your tabletop when not in use.
Store safely and out of reach from children or pets.

OPERATION:

Page 2 - Prep & Operation

Carefully remove all wrapping around the tabletop &
bulb.
Remove the remote, battery, and cleaning cloth. Insert
the battery into the remote.
Place the tabletop on a flat surface and inspect the unit.
Check to make sure the plug and bulb are intact and
undamaged.
Test the unit before treatment by plugging it into a wall
outlet and pressing the red ON/OFF button either on the
base of the unit or on the remote. You should hear a
beep. This means that the unit itself is turned on but the
bulb has not been activated yet.
Continue the test by selecting one of the timer settings,
either on the base of the unit or on the remote. You will
now begin to hear successive beeping coming from the
unit. Immediately turn the unit off once the successive
beeping occurs by pressing the red ON/OFF button on
the unit or the ON/OFF button on the remote. You will
have 30 seconds to safely turn off the unit after selecting
a timer setting before the bulb activates. The tabletop
has now been tested and is ready to use.
If the unit does not turn on after being plugged in, refer
to the troubleshooting section of this guide on page 4.
If the remote fails to activate the unit, refer to the remote
syncing section of this guide on page 4.