Tool it 024212, Перевод оригинальной инструкции

Страница: 6 / 30

SAFETY INSTRUCTIONS
This manual contains safety and operating instructions. Please read it
carefully before using the device for the first time and keep it for future
reference. Read and understand the following safety instructions before
use.
Fire and explosion risks!
A battery can emit explosive gases when on charge.
The WIRELESS BATTERY CHARGE MONITOR should only be connected
to batteries with a rated output voltage of 12 / 24V.
CAUTION: a polarity reversal can blow the fuse and may cause
permanent damage. Damage due to a polarity reversal are not covered
by the warranty. Do not use on a vehicle with an electrical system with
the positive grounded.
CAUTION: if the car battery is disconnected, some management systems
may be disabled.
Refer to your vehicle manual for installation information.
Do not use the WIRELESS BATTERY CHARGE MONITOR if the cord or
terminals are damaged.
Do not use the WIRELESS BATTERY CHARGE MONITOR if it has received
a sharp blow or has been damaged in any way.
Do not disassemble the device. Incorrect reassembly may result in a risk
of electric shock or fire.
Risk of acid dispersion!
•Wear protective goggles and gloves.
• In case of contact with the eyes or the skin, rinse immediately with
water and see a medical doctor as soon as possible.
• Avoid flames and sparks. Do not smoke near the device.
• Protect the electrical contact surfaces of the battery against short
circuits.
Complies with European directives. The EU Declaration of Conformity is
available on our website.
EAEC Conformity marking (Eurasian Economic Community).
This hardware is subject to waste collection according to the European
directive 2012/19/UE. Do not throw away in a household bin!
6
WIRELESS BATTERY MONITOR
EN
Translation of the original instructions