Tony Ray’s DH.53 Humming Bird, Руководство пользователя

Страница: 10 / 49

Radio equipment
Steps 70 and 71
•
There are 2 balsa boards shaped to fit below the cockpit and within the
fuselage. One is for the illustrated combined unit with 2 integrated servos,
the other is for a controller board with 4 servo ports and 2 separate 1.7gm
servos.
•
In either case, attach the motor wires to the chosen controller board and fit
this to the sheet adding the servos if using the 4 port board.
•
Make up pushrods between the servos and the rudder/elevator and adjust to
fit.
•
If you are using 4 channels you will need to fit servos and pushrods to the
wings and run the leads into the fuselage