2
、
Plug in the power, press the down switch “DOWN”, then do not let go of the lift switch
to observe whether the induction layer and curtain layer are normal down, if abnormal,
please hit the switch on the “UP”, try again after troubleshooting.
3
、
If it is All-in-one machine (central control
) control, press “DOWN” to put down the
screen, if fail, then press
“UP” to check the induction layer and the curtain layer whether Can
be put down, if you can put down, that means the downward and upward line reversed. If
there is no response, please check the machine (central control) and the touch screen
projection power supply connection is wrong, please refer to the machine manual.
★
Installation dimension drawing
：
