3、Hanging the touch projection screen, please pay attention to whether the solid,
clean the touch screen projection screen above the host tape, special attention should
be paid, keep the bottoms of the curtain rod and touch layer bar into a free vertical
state to ensure that the projection screen and the touch layer free to lift. Plug in
the power, press the lift switch, down the projection screen and the sensor layer,
please observe whether there is pause problem, if abnormal, please close the projection
screen,
after troubleshooting, put down the projection screen and sensor layer.
★
Touch projection screen
fitboard
software installation：
1
、
Turn on the computer, projector, put down the touch projection screen (keep the switch
DOWN state), and computer startup is completed. As shown
：
