TONO Theta-9000e, Руководство пользователя, Страница: 61 / 71

58
TYPE
·
SENSE
changes the polarity of sending/receiving signals.
TYPE
·
SENSE !
·
1 switches the polarity of receiving.
TYPE
·
SENSE "
·
2
switches the polarity of sending.
SHIFT | TYPE
·
SENSE changes buffer transmission mode.
SHIFT | TYPE
·
SENSE RETURN enables the LINE mode and
SHIFT
|
TYPE
·
SENSE
SPACE
enables the WORD mode.
Depress any key except
RETURN
,
SPACE
or
LINE FEED after SHIFT | TYPE
·
SENSE for
the normal buffer transmission.
INPUT
·
CASE You may manually change the case of LETTER/FIGURE in
RTTY (BAUDOT) with this keystroke.
SHIFT | INPUT
·
CASE !
·
1 ~ %
·
5
enables the input jack switching.
DIDDLE·PTT
With this key, automatic ON/OFF for PTT jack is available. For
manual operation redepress it.
SHIFT | DIDDLE·PTT activates or deactivates automatic "IDLE signal" insertion in
RTTY (BAUDOT and ASCII).
[
RESET
] initializes the microprocessor.
SHIFT
|
SPACE
interrupts buffer transmission or screen transmission ("SEND"
function when part way thru.
CTRL Hold this key down and tap the other key when control codes
are desired.
[
CAPS LOCK
] should be depressed when small letters are used. Another
keystroke changes to the capital letter mode.
[ BREAK ] interrupts output signals. To resume transmission, redepress.
DEL
transmits control code 'DEL' (7FH).
SHIFT DEL allows you to edit any errors in the buffer memory and in the
channel memory (RUB OUT function).
[ LP ] Hold this key down while drawing the graphics on the screen
with the light pen (see 7-2).
TAB
transmits control code (09H).
ESC A In CW mode, it decreases the sending speed (see 5-1-5). In
BAUDOT and ASCII mode, it decreases the sending speed and
the receiving speed (see 5-2-3).
ESC B enables and disables the split screen mode (see 7-1).