TONO Theta-9000e, Руководство пользователя, Страница: 42 / 71

39
7-4-3 Operation
Press ESC "
·
2 so that SEL-CAL system is activated. Then you should see FUNC=SEL
on the screen.
(1) When you receive signal which corresponds to your own "SEL-CAL Characters"
stored in channel 6-3 ~ 6-4, received text is displayed on the screen and printed out
to the printer.
(2) The REMOTE jack is turned ON. If the peripheral equipment (such as cassette tape
recorder) is DC 100 V/200 mA or less, you can control it.
(3) When you receive the signal which corresponds to your "End of Text" stored in
channel 6-5 ~ 6-6 (the REMOTE jack is turned ON), the message stored in channel
6-1 ~ 6-2 is automatically transmitted as "Answer Back Data". Be sure that PTT jack
is ON during the transmission.
(4) After the transmission of "Answer Back Data", PTT jack is turned OFF.
(5) Now, further signal is not received.
(6) ' / ' is transmitted 6 Times before the transmit of "Answer Back Data".
7-5 Full Duplex Mode
When the Θ-9000E is used for ASCII mode, you may select a full duplex mode of operation.
With a full duplex mode, the receive and transmit data circuits are completely separated so
that the Θ-9000E can receive and transmit simultaneously.
You may manually change the mode with the keystroke
ESC %
·
5
. Notice that
FUNC=FULL
is displayed while using in full duplex mode.
NOTE:
You may not be able to select full duplex mode in CW and BAUDOT mode.