12
Initial Settings
1. When you finish making connections, set the
power switch in the “ON” position. (This set-
ting is referred to as Play mode.)
Use the
▲
/
▼
buttons to select a program.
2. Set the input level switch to a position appro-
priate for the output level of your guitar.
Hi:
Guitars with a high output level
(humbucking pickups)
Lo: Guitars with a low output level
(single coil pickups)
3. Set the volume control of the guitar to its usual
position.Use the Value dial to adjust the mas-
ter level.
If you want to use the infrared transmitter func-
tion, refer to p.26 of Edit mode, "9) TX (infrared
transmitter)."
Quick Edit
In each mode (except when Mute/Bypass or Key
Lock are active), you can use the Amp Model-
ing selector to quickly change the amp model-
ing type, or use the control knobs to adjust the
gain, tone, or volume of amp modeling. When you
move a control knob, the parameter name and
value will appear for several seconds in the val-
ue display. If the setting matches the original set-
ting, the ORIG icon will light.
The Delay Time of Delay Modeling can also be
set by pressing the TAP button twice at the de-
sired interval (except when in Rhythm & Bass
mode). To check the Delay Time that was speci-
fied, press and hold the TAP button for two sec-
onds or longer.
Program selection
Program name
Input level
switch
Amp selection
Amp gain, tone,
and volume
Program
number
Set the
delay time
Master level
adjustment
Содержание Toneworks Pandora PX4
Страница 1: ......