Tone2 Saurus, Справочное руководство

Страница: 20 / 33

Matrix1 -> Matrix15 – Sets the modulation destination to matrix position 1 through 15
Osc1 Vol - Selects Osc1's volume control as destination
Osc2 Vol - Selects Osc2's volume control as destination
Noise Vol – Selects an internal noise generator as destination
4.8 Gate & Arpeggiator
Saurus also features a dedicated Gate which can be used to modulate volume or any
other option within Saurus' modulation system.
When the Arp/Gate menu is switched to one of the Gate modes the steps will function as
a modulation value provider, meaning that each step will output a specific value, these
values can then be routed within the Modulation Matrix to setup a Trance gate or drive
other types of modulation.
The step values can be edited by click-holding one of the small rectangle shaped steps
and dragging them up or down to in/decrease their value.
Note that when in Arp mode these same steps can still be used for Gate and/or modulation
purposes, the main difference between the Arp and Gate mode is that in Arp mode the
Arpeggiator is also active.
Saurus ships with some very good Trance and modulation gate presets, just open the
patch manager and browse to the Gate category to hear some examples.
-17-