- 19 -
6
6
6
6.
.
.
. CHANGING BAR SOCKET
CHANGING BAR SOCKET
CHANGING BAR SOCKET
CHANGING BAR SOCKET
○ Remove bar socket form the wrench by unscrewing set screws with (-)
driver. Do not remove the set screws completely from outer socket
holder.
○ Select adequate bar socket for the bolts being tightened.
i.e. Use TONE genuine 7/8
”
bar socket for tightening 7/8
”
high strength
hexagonal bolts/nuts.
○ Mount the bar socket on the wrench body and remove the gap between the
bar socket and the wrench body.
Fasten the set screws only after the gap is completely removed.
○ Pull the bar socket in order to confirm that the bar socket was mounted on
the wrench body completely.
