Tone Jones A/B 2-Looper, Руководство пользователя

Страница: 4 / 15

www.tonejones.com A/B 2-Looper
4 of 15 2/1/2007 Rev 1.0
Fast Start - Connecting the A/B 2 Looper
The Looper consists of two switches and a number of
input/output jacks to achieve its signal routing functions. Figure
1 shows typical connections for the A/B Looper.
Figure 1: Connecting the A/B 2-Looper
 Input – This is the main instrument input and the start of the
signal chain. Plugging a mono ¼” cable into this jack
turns on the battery.
 Output
– Main output and the last jack in the signal chain.
 Send – The output for the Loop. Connect this jack to the
input of your effects, amplifier, etc. Stepping on the
associated switch toggles the signal between the loop
and the Output jack.
 Return – The input for the Loop. Connect this jack to the
output of your effects or use as a separate input (see
Triple Instrument Switcher Mode).
 9Vdc Input
– Plugging a DC power supply into this jack
disconnects the battery from the circuit. Any NEGATIVE
TIP, DC power supply from 6-18V may be used. The higher
the voltage the brighter the LED’s.
Rtn Send Rtn Send
Input Output
A/B 2-Looper
9Vdc
Input