Important! Always position Baby Unit at least
1 metre (but no more than 3 metres away)
from your baby. Ensure all parts are kept out
of baby’s reach. Never place any parts of the
monitor in or on a cot. Keep cot sides and
ends at least 40cm from surrounding
furniture.
SET UP
Switch On & Connect
Press and hold the button until it
glows green.
Sound Activation
Audio alarms will sound to indicate:
Alarms
To locate a lost Parent Unit, press the Baby
Unit’s button three times in quick
succession to activate the Parent Unit’s
pager. Its alarm will sound for 60 seconds.
Press any button to silence the alarm.
PAGER
Switch On & Connect
Press and hold the button until it glows green.
Nightlight
BABY UNIT
PARENT UNIT
Like a mobile phone, we
recommend charging your
monitor at night or during rest
breaks. This will prevent a lack of
daytime charge or night-time
interruptions.
Sound
Activation
Sound
Sensitive
Lights
Volume
Nightlight
Nightlight
Indepedent Use......
Use the Baby Unit without monitoring. With the unit switched off, press and hold
the button. The button will glow red indicating ‘independent mode’.
This mode means you can go on using the Baby Unit even when your baby is
older and no longer needs monitoring.
(x3 per minute )
LOW BATT
(Continious beep)
LOST LINK
GB
3
8Hrs
8
8
1
Activate baby’s nightlight by pressing the button.
Adjust the brightness while the nightlight is switched on: press and hold the button
on the Baby Unit. Release when you reach desired brightness.
The Baby Unit will remember the brightness setting when you switch off.
Slide the switch up and the monitor
will mute 15 seconds after your baby settles.
Mute continues until a set threshold
is breached by louder noises. For
example, a cry rather than a gurgle. Ideal
for when baby is a little older and you no
longer want to hear every sound.
2
