Tomura 16-CH, Руководство пользователя

Страница: 74 / 121

- 74 -

▲▼
or Jog/Shuttle (Mouse: Left click)
Press these buttons to select the items.

ESC (Mouse: Right Click)
Press this button to escape from this screen, and return to Network Setup display.
If the Save dialog is shown, press
ENTER
to exit and save,
ESC (Mouse:
Right Click) to exit without saving.
Following is a brief description for each item and its specific operations:

Control Port – the control port for remote access. The default value is
67
.
Please follow the Text Input method described in Section 4.1 to modify this item.

Data Port – the data port for remote access. The default value is
68
. Please
follow the Text Input method described in Section 4.1 to modify this item.

HTTP Port – the HTTP (web page) port for remote access. The default value is
80 . Please follow the Text Input method described in Section 4.1 to modify this
item.

UPNP Port Forwarding
– to use UPnP port forwarding for Control/Data/HTTP
port for internet access if the router supports UPnP. Press
+/-
buttons to change
the value. If UPnP port forwarding is used, the DVR will try to connect with
UPnP router to set Control/Data/HTTP port after the user exits from this screen.
It may take from a few seconds to a few minutes. If successful, new
Control/Data/HTTP port will be shown with (*) in front of it.

WAP Picture Quality
– the WAP picture quality if WAP access is supported for
the DVR. Press
+/-
buttons to change the value.

Video Stream
– network live video stream is the same as “Record” stream, or the
others for dual streaming. If dual streaming is used, the total system recording
rate will be lowered.
“Record” means that dual streaming is not used. Press
+/-
buttons to change the value. To use dual streaming in I.E. or CMS, the user
must select “Extra” in “Video Stream” in the “Device List” in remote PC (Sec.
9.1).
Please note that for High compression ratio in Pre-Camera setup, dual
streaming is always used.

DVR Name
– the “DVR Name” used in the “CMS Server” if CMS Server
(described below) is (to be) connected with the DVR. Please follow the Text
Input method described in Section 4.1 to modify this item.

CMS Server URL #1-2
– the URL (Uniform Resource Locators) for the CMS
Server #1 and #2. The DVR will connect with up to two CMS servers
automatically once it‟s running.
Please note that with this feature, the DVR
needs not to be a web server, while the CMS server needs to be a web server.
Please follow the Text Input method described in Section 4.1 to modify these