- 06 -
- 07 -
Control panel
Chapter 3
Installation Guide
Control instructions
Use control panel to control scooter, the specific features are as follows.
1.1 Long press the power switch button to turn on the machine, and the front light, lower atmosphere light, tail light, and brake light
are all on. The control panel shows the power and speed.
1.2 After turn on, the control panel display shows “1”, indicating that the speed is 1st gear. Press the button to display 2nd gear; the
highest display is 3rd gear.
1.3 Press the button twice the front light is on and press the button twice the front light goes out.
1.4 Press the button three times to display the total mileage, then press the button three times to display the speed.
1.5 When the brakes are applied in emergency, the brightness of the brake light increases after the brake handles are gripped
1.6 Power display: five lights are 100%, four lights are 50%, three lights are 30%, two lights are 10%, one lights are less than 10%.
Speed
Batter y
Speed gear
Headlight status
Bluetooth status
1. Install the brakes to correct position with the Hex wrench (M5 in the tool bag).
2.Install the handlebars, pay attention to the installation direction
.
