Tommy Bahama Bahama Breezes TB344AP00 Скачать руководство пользователя страница 3

3

THIS FAN IS SUITABLE FOR DAMP LOCATIONS SUCH AS

COVERED PORCHES, COVERED PATIOS, AND COVERED DECKS...

ANYWHERE THERE IS A ROOF OVERHEAD.

Tools Needed for Assembly

One Phillips head screwdriver
One wire stripper
One stepladder
One 5/32” hex wrench (supplied)
Four wire connectors (supplied)

Materials

Wiring, outlet box and box connectors must be
of type required by the local code. The mini-
mum wire would be a 3-conductor (2-wire with
ground) of the following sizes:

This Manual Is Designed to Make it as Easy as Possible for You to

Assemble, Install, Operate and Maintain Your Ceiling Fan

Installed Wire Length

Wire Size A.W.G.

Up to 50 ft.

14

50-100 ft.

12

Before assembling your ceiling fan, refer to
section on proper method of wiring your
fan (page 9). If you feel you do not have
enough wiring knowledge or experience,
have your fan installed by a licensed elec-
trician.

!

WARNING

Unpacking Instructions

For your convenience, check-off boxes are provided next to each step. As each step
is completed, place a check mark in the box. This will insure that all steps have been
completed and will be helpful in finding your place should you be interrupted.

Do not install or use fan if any part is dam-
aged or missing. Call Toll-Free:

1-800-654-3545

!

WARNING

This product is designed to use only those
parts supplied with this product and/or
any accessories designated specifically for
use with this product by Emerson Electric
Co. Substitution of parts or accessories
not designated for use with this product by
Emerson Electric Co. could result in per-
sonal injury or property damage.

!

WARNING

1.

Open styrofoam unit containing fan.
Remove top half

of

styrofoam unit.

Remove parts and check to see that you
have received the following parts:

NOTE: If you are uncertain of part
description, refer to exploded view
illustration.

a. Fan motor and housing assembly

b. One ceiling cover

c. One motor cover

d. Five blade flanges

e. One hanger bracket

f. One hanger ball/downrod assembly

g. One switch housing cover

BP7289-1 Tommy Bahama TB344  6/17/13  10:33 PM  Page 3

Содержание Bahama Breezes TB344AP00

















Отзывы: