HOW TO USE THE MOVEMENT SENSOR MAT
• Place the movement sensor mat underneath the mattress, in a lengthwise direction directly under where your
baby sleeps. For optimum performance, there should be no bed clothes tucked between the sensor mat and
the mattress. If the mattress support is too soft, place a hard board underneath the mat to provide a
firm surface for it. The size of the board should be larger than the sensor mat.
• With your baby placed in the cot, switch on the movement sensor mat by turning the movement sensitivity
knob in a clockwise direction. Adjust the position of knob until the movement indicator blinks at the same pace
as the your baby’s movement.
• Slip the control box underneath the mattress and keep out of reach of baby, placing it as far away from
the movement sensor mat as possible.
• You may need to adjust the sensitivity as baby grows and gains weight.
Note: Before attempting to adjust the
sensitivity knob, wait for at least 15-20 min until your baby has settled down or fallen asleep.
• Ensure the Camera and movement sensor mat are in the same room, less than 10 metres apart, or you may be
unable to detect movement.
• If the movement sensor mat does not detect any activity from baby for over 20 seconds, the Parent unit will
sound an audible alarm to alert you and the screen will show the message 'No movement detected'.
• In order to avoid false alarms when removing baby from cot for feeding or comforting, press the alarm hold
button (22) within 20 seconds of removing baby, or just before if you prefer.
• To stop the alarm, press the hold button.
• Upon placing your baby back into their crib, the movement sensor mat will automatically resume
monitoring baby’s movement after 20 seconds.
Note: To activate your movement sensor mat, set the movement monitoring function to ON in the menu.
After 20 seconds the Parent unit should sound an alarm to show it is not picking up any movement. Slightly
tap the mat and the alarm will stop - this will confirm the system is working properly. Change the setting back
to OFF until you are ready to use the pad
.
LOCK
OPEN
correct
incorrect
3
8
Install 3x AA batteries
Mattress
