Tomcat 10 Qt HEPA, Руководство по эксплуатации

Страница: 7 / 16

SUPERDUTYVAC-OP-EN
- 7 -
HOSE CONNECTIONS:
If you have a two-piece Wand, you will need to attach the
two pieces by sliding side
(A) over end (B) (SEE BELOW) .
Standard Wand Tools:
Side Winder Wand Tools:
PRE-CLEANING CHECKLIST:
Read and understand the Safety Messages section on
Pages 3 and 4 before operating the machine.
1. Check and make sure that there is electrical outlets
available for use or large gauge extension cords.
2. Check the condition of the Vacuum exterior, vacuum
fi lter bags, and tools.
OPERATING - VACUUMING:
1. Move vacuum to work location.
2. Connect machine cord to power source. When
cleaning an area, move so that you are moving
away from the power supply. This will help avoid
entanglement with the cord as well as reduce the need
to move do a different power source.
3. Adjust the shoulder and waist straps to a comfortable
position. Maintain the vacuum tools run fl at on the
fl oor for best usage.
A
B
OPERATION CONTROLS
A
B