background image

 

 

31

 

Seat Belts 

 

FEATURES & CONTROLS 

Seat Belts 

The TOMCAR® is equipped with a 4-point safety harness. 

To install the 4-point harness, secure the clips for the left and right lower 
straps of the harness to the seat belt brackets. Place the left and right 
shoulder harness over the seat. Cross the shoulder straps 
behind the seat and secure the clips to the shoulder harness brackets. 

 

WARNING

 

For your safety, when using the 4-point harness, please perform the 
following steps:

 

  

1.

 

Loosen shoulder straps. (1)  

2.

 

Place arms through the shoulder straps. (1)  

3.

 

Insert the latch plate into the buckle until it clicks. (3) 

4.

 

Tighten straps (2) followed by shoulder straps (1) 

5.

 

Make sure the harness is tightened securely. 

Falling from a moving vehicle could result in serious injury or death. Always 
fasten your harness securely before operating or riding in the TOMCAR®. 

Small passengers require special restraints, which are not available with this 
vehicle. No passenger should be allowed to ride in the TOMCAR® if the harness 
does not fit properly or if the passenger is under five years of age. 

To unfasten, press the square 

red button in the buckle’s center.

Содержание TM27EL






































































































Отзывы: