INSTRUCTIONS
PARTS INCLUDED
1.
(8X) T-NUT & PLASTIC SPACER
2.
(4X) LOCKRACK BASE
3.
LOCKING MECHANISM
4.
(8X) NUT ATTACHING BASE TO T-BOLT
5.
RUBBER BASE PROTECTORS
6.
(4X) LOCKRACK ARM
7.
SPACE BAR
8.
(8X) ADAPTORS
9.
TOOLS
LOAD BAR SET UP
INSERT SPACE BAR
INTO BASES. SELECT
THE DESIRED DISTANCE
YOU REQUIRE FOR YOUR
WATERCRAFT. ALIGN WITH
T BOLT, PLACE THROUGH
BOTH BASES AND SPACE
BAR..
LOAD BARS MUST BE
POSITIONED AT LEAST
24” OR MORE APART TO
ENSURE STABILITY.
ATTACH LOCKRACK BASES TO LOAD BARS
IF THE LOAD BARS ARE
EQUIPPED WITH ACCESSORY
GROOVES SLIDE THE
T BOLT HARDWARE WITH THE
BLACK RING INTO THE LOAD
BAR GROOVE. IF THE LOAD
BARS DO NOT HAVE GROOVES,
THEN USE THE ADAPTER
INSTRUCTIONS BELOW.
SLIDE THE T BOLT TO ALIGN
WITH THE SCREW HOLES IN
THE BASE.
BEFORE MOUNTING THE
BASE ONTO THE LOAD
BAR, PULL THE RUBBER
PROTECTOR FROM THE
BASE.
1.
ONCE THE BASE IS PROPERLY
POSITIONED ON LOAD BAR,
TIGHTEN THE BOLTS WITH A
10MM WRENCH.
2.
AFTER THE BASE IS TIGHTENED
COMPLETELY TO THE LOAD
BAR, REPLACE THE RUBBER
PROTECTORS WHILE ALIGNING
THE PRE-FORMED HOLE WITH
THE BOLT.
TOOLS NEEDED FOR INSTALLATION (INCLUDED)
