CLEANING
CAUTION:
Blades are extremly sharp.
Keep fingers away from blades.
IMPORTANT:
The Tomato Saber™ must be cleaned
after each use.
1. Remove Tomato Catcher and Table Stop to clean
separately.
Note: Do not remove Perma-Tight™
blade cartridge from unit.
2. Spray slicer with hot water to remove any tomato
residue.
3. With hot, soapy water, scrub Tomato Pusher using
a nylon brush. With same brush, clean blades
from back side.
4. Rinse unit with hot water.
5. Let air dry.
REPLACING BLADES
1. Grasp round, red handle and pull carrier assembly
all the way back.
2. While holding the bridge with one hand, firmly
grasp the blade cartridge by the finger grip with
other hand. Pull the blade cartridge all the way
out. The blade clip will release the cartridge. See
figure 5.
3. Slide in the new blade cartridge with arrow facing
up. See figure 6.
4. Firmly push the blade cartridge into place until it
snaps into the blade clip. See figure 7.
5. Properly discard the old blade cartridge using the
packaging from new blade cartridge.
figure 6
figure 5
figure 7
3
