INSTALLATION
1. After you have removed the Tomato Saber™ from
the carton, inspect the unit for signs of damage. If
there is damage to the unit:
•
Notify carrier within 24 hours after delivery.
•
Save carton and packing materials for inspection
purposes.
•
Contact your local Prince Castle dealer or the
Prince Castle Customer Sales Department at
1-800-722-7853, if purchased directly, to arrange
for a replacement to be sent.
2. Verify that all parts have been received.
•
Tomato Saber™ slicer and Perma-Tight blade
cartridge.
•
Tomato Catcher
–
neatly catches tomato slices.
•
Table Stop Assembly – stabilizes unit for easier
slicing.
•
Tomato Core-It™ – easily removes cores before
slicing.
3. Place slicer on prep table or flat surface.
4. Attach Tomato Catcher to slicer by sliding bottom
cutouts over knobs at far end of unit. See figure 1.
IMPORTANT:
Use of the Tomato Catcher is optional.
5. Attach Table Stop by first removing two knobs from
the operator end of slicer. Align the two holes of
Table Stop with the holes in the base of the slicer.
Reattach the two previously removed knobs over
the Table Stop. See figure 2.
IMPORTANT:
Use of the Table Stop is optional.
OPERATION
CAUTION:
Blades are extremly sharp.
Keep fingers away from blades.
IMPORTANT:
The Tomato Saber™ is designed to
slice
tomatoes
only. Using it to slice other products
will damage the slicer and void the warranty.
1. For best results, use fresh, ripe tomatoes. Toma-
toes should not exceed 3-1/2 inches (.76cm) in
diameter.
2. Core the tomato using Prince Castle’s Tomato
Core-It™. Make sure to remove the core com-
pletely.
3. While holding top handle with one hand, grasp
round pusher handle with other hand, and pull
carrier assembly all the way back.
4. Position tomato against Tomato Pusher with core
side down. See figure 3.
5. While holding bridge with one hand, grasp round
pusher handle with other hand. Push tomato com-
pletely through blades with
ONE QUICK, FIRM
STROKE
until the pusher head stops. See figure 4.
2
figure 1
figure 2
figure 3
figure 4
6. After tomato has been sliced, remove tomato slices
from Tomato Catcher.
