EN
USER INSTRUCTION
TOM02I (HYBIRD series)
Page 21
13.
Heater
errors
Heater errors are the errors which generate the switch off of one or more heaters.
When a heater error is detected, the involved heaters are switched off, a beep sounds (only if one or more
heaters are active) and the displays corresponding to these heaters show a ‘F’ letter and the error code
alternately.
While in error status the keys of the corresponding heaters are not operative.
All errors are recoverable. That is, when the cause of the error disappears the corresponding displays are
deactivated and the heaters return to normal operation.
Heater errors
Event
(Visualization Priority Order)
Error recovery
Action
Heater Display
(fore 0.5 sec./ back 0.5 sec)
Communication fault
When the fault disappears
Left or right side
heaters Off (****)
F5
Heater temperature sensor
short-circuit
When the fault disappears
Heater Off(**)
F1
Heater temperature sensor
open-circuit
When the fault disappears
Heater Off(**)
F2
Heater temperature sensor
error 1
When the fault disappears
Heater Off(**)
F7
Heater temperature sensor
error 2
When the fault disappears
Heater Off(**)
F8
Bus relay fault
When the fault disappears
Heater Off(**)
F9
Power unit temperature sensor
short-circuit
When the fault disappears
All heaters Off
(***)
F3
Power unit temperature sensor
open-circuit
When the fault disappears
All heaters Off
(***)
F4
Mains zero crossing loss
When the fault disappears
Left or right side
heaters Off (****)
F6
(**) Heater switched off and locked
(***) All the Induction heaters switched off and locked
(****) Left or right side heaters switched off and locked
EN
USER INSTRUCTION
TOM04I-P (PANORAMIC series)
Содержание TOM04I-P
Страница 22: ......