background image

Warranty

TOMAHAWK POWER

 products are covered by warranty for a period of

 365 days f

rom 

the date of purchase 

against defects in material or workmanship provided that: 

z

The product concerned has been operated and maintained in accordance with the operating
instructions.

z

Has not been damaged by accident, misuse or abuse.

z

Has not been tampered with or repaired by any unauthorized person.

The owner is responsible for the cost of transportation to and from the authorized repairer and the unit is
at the owners risk while in transit to and from the repairer.

Impact damage is not covered under warranty. Clutches are not covered under any warranty.
Engines are officially guaranteed by engine manufacturer. Please refer to the annex for
engine warranty.

For questions, quotes, servicing and more - call 

TOMAHAWK POWER

 at 866-577-4476

Maintenance Record 

PREVENTATIVE MAINTENANCE AND ROUTINE SERVICE PLAN 

This Scarifying Machine has been assembled with care and will provide years of service. Preventative 
maintenance and routine service are essential to the long life of your Scarifying Machine. After reading 
through this manual thoroughly, you will find that you can do some of the regular maintenance yourself. 
However, when in need of parts or major service, be sure to see your dealer. For your convenience we 
have provided this space to record relevant data about your Scarifying Machine. 

Invoice Number: 

Type of Machine: 

Date Purchased: 

Dealer Name: 

Serial Number: 

Dealer Phone: 

REPLACEMENT PARTS USED 

MAINTENANCE LOG 

PART 

NO. 

DESCRIPTION  QTY

COST DATE DATE OPERATION 

9

Содержание TSCAR-8H
















Отзывы: