Tomahawk TR68H, Руководство по эксплуатации, Страница: 14 / 40

14
4. Operation
4.1 Application
Rammers are designed to compact loose soils and gravel to prevent settling and to pro-
vide a firm, solid base for the placement of footings, concrete slabs, foundations, gas piping
works, water pipe works, and cable backfill works, etc.
The Tamping Rammer is to be used for compacting cohesive clay, gravels, and patching
work on asphalt, etc.
4.2 Structure
Thetop end is made up of the engine, Clutch, Connecting Rod, Operating Handle, and Fuel
Tank that connects via Shock Absorbing Rubber to the body. The bottom end is made up of
Spring Cylinder (Sliding part), Foot Plate that ramps body, Foot and Bellows.
4.3 Before Starting
- This machine is of oil bath lubrication system.
- Check the oil level through a window at rear end of the foot. Replenish oil if oil is not visi-
ble at the window. For lubrication, use automobile engine oil of SAE 10W-30.
- Fill the fuel tank with regular gasoline (unleaded). Simultaneously, check engine oil and
make it a habit to replenish on the earlier side. Low lubrication oil level may result in
engine seizure due to consumption during operation. Nevertheless, oil level should be
checked prior to start up without fail. For lubrication, use automobile engine oil of 10W-30
SE, SF or better grade. See Engine Operating Manual for further detail.
- Check every bolt, nut or screwed area for tightness. These may have become loosened
due to vibrations from previous use.
- Remove dirt and dust. Particularly clean the vicinity of recoil starter and foot.
Please do not use in the following cases as it may cause damage because
machine is unbalanced.
- Pile foundation
- Hard soil excessively compacted over normal condition
- Steep bank and slopes
WARNING