21
ENGLISH
Install the linkage in the second hole of the
servo horn. Enlarge the hole if needed. Con
-
nect the clevis to the rudder horn. Adjust
the clevis so the aileron is centered when
the servo is centered using the radio system.
Tighten the nut against the clevis and use
some threadlock.
08
Fix the aileron with tape to neutral and mark
the position of the rudder horn.
06
Use hobby scissors to trim the aileron servo
cover. Don‘t use the markings as these will
not fit. You have to measure the correct di
-
mension. The cover is attached to the wing
using clear tape or thin CA.
09
Make a slot for tue rudder horn and glue it in
with epoxy.
07
Содержание Cyclone
Страница 34: ...34 NOTICE NOTIZEN ...
Страница 35: ...35 NOTICE NOTIZEN ...
Страница 36: ...2017 Tomahawk Aviation GmbH Auenland 8 25336 Klein Nordende Germany ...