EN - 19
Switching on
Slide the position button for ON/OFF and the heating positions to position 1, 2 or 3 to switch on the electric underblanket.
In activated condition, a heating position is lighted - 1, 2 or 3.
Setting the heating position
Position 1: minimum heating
Position 2: medium heating
Position 3: maximum heating
WARNING:
If the electric underblanket is used for several hours, we
recommend setting the lowest heating position (position 1) to
avoid the body overheating and thereby any potential burns to
the skin or heat stroke.
Switching off
Slide the position button downwards to switch off the electric underblanket. The heating position no longer lights up.
Use
• Evenly spread the electric underblanket over your mattress, starting at the foot end. Fasten the electric blanket with
the elastic bands around the corners of the mattress. Approximately, the cord should be at shoulder height. The electric
underblanket can be used on both sides.
• First connect the control to the connection point in the blanket by connecting the plug.
• Then insert the plug in the socket.
• Then, as usual, lay the fitted sheet over the bed, so that the electric underblanket is between the
mattress and the fitted sheet. Each time you make the bed, check that the electric underblanket is flat
and properly spread, before you switch it on.
CAUTION!
Make sure the electric underblanket is spread out fully
flat and does not fold or crumple during use.
We recommend
switching on the electric underblanket about 15 minutes before you go to sleep and covering it with a duvet to prevent
the heat from escaping.
ATTENTION
• The electric underblanket heats up the fastest when you first switch on the highest temperature level.
ATTENTION
If the electric underblanket is not used for a number of days, slide the position button downwards to switch off
the electric blanket and remove the plug from the socket. Then disconnect the control from the electric underblanket
by removing the plug.
Automatic deactivation function
This electric blanket has been provided with an automatic deactivation function. This means that the supply
of heat is stopped approx. 180 minutes after the electric blanket was activated. In order to use the electric blanket
again, you must first switch the position button OFF. After approximately 5 seconds you are able to switch the
electric blanket on again.
Содержание TEB1500W
Страница 2: ...2...
