TOM-Audio TG-100 eTour, Руководство пользователя

Страница: 51 / 62

51
User Manual - TOM-Audio TG-100
51
4. To change the sensitivity of the microphone go to the menu „RF Power“. Here you
can select with the „Mute“ and „Power“ button between 0, 5 and 10 dBm (decibel
milliwatt).
Remark
: The higher the number in dBm, the higher the output power of the
microphone and the louder the voice of the guide with the guests.
4.11.3. Receiver TG-100R
You can adjust the receiver‘s volume by pushing the increase and decrease
button (
).
The volume level reaches from muting ( ) to the highest setting with seven
bars (
).
4.12. Recharging the batteries
If the display shows a battery symbol with three bars ( ) in it, the battery‘s capacity is
approx. 100 %. In this case the transmitter‘s battery will last for approx. 15 h. The recei-
ver‘s battery will last for approx. 20 h.
If the display shows a flashing battery symbol with no bars ( ) in it, the battery‘s capa-
city is approx. 10 %. In this case you should follow these instructions in order to charge
the devices.
1. Please put the devices in the charging cradle of the provided trans portation and
charging bag.
Remark : The transmitter and receiver use the same charging cradle. The battery is
charged via the micro-USB port.
2. Connect the transportation and charging bag with the power outlet using the
provided power cable. You can find the plug for the charging cable on the right
side of the charging cradles in the bag.
3. The LED of the occupied charging cradle will be on red while charging.
4. When charging is completed the LED will switch to green.
5. It takes about 6 hours to charge the device to full capacity.