TOLSEN TOOLS Force Xpress 79575, Инструкция по эксплуатации

Страница: 5 / 16

5
SETUP AND SPECIFICATIONS
1
A
Connection of garden hose
Mounting of high pressure hose
A
B
Screw the water inlet coupling (1) tight on to the water inlet Note:
The inlet filter (A) must always be fitted in the water inlet pipe to filter
out sand, lime stone and other impurities as these will damage the
pump valves.
Caution: Failure to fit the filter will invalidate the guarantee.
Connect the garden hose with a standard quick coupling
Attach the high pressure hose to the trigger gun and machine.
Detach the high pressure hose by pressing the pawl (A) or button (B)
Mounting of lance and nozzle
Push the lance into the trigger gun
When inserted turn it. Caution: Make sure the lance is properly fixed to the
gun
Attach the nozzles. Caution: When attaching the nozzle the button (A) on
the nozzle should come out again. Check before activating the trigger that
the nozzle is properly fixed.
A
Water connection
Connecting the water supply pipe
Follow your water supplier’s instructions .
For connection information, see the data plate/technical specifications
Use a reinforced hose (not supplied) with a standard connection (ext. diameter: 16mm/int. 12mm, maximum length: 25m).
IMPORTANT! Only use water without any impurities. If there is a risk of sand particles in the inlet water (i.e. from your own well), an
additional filter should be mounted.
Let the water run through the water hose before connecting it to the machine to prevent sand and dirt from penetrating the
machine. Note: Check that the filter is fitted in the water inlet pipe and that it is not clogged up.
Connect the water hose to the water supply by means of the quick connector (inlet water, max. pressure: 10 bar, max. temperature:
60°C).
Turn on the water.