background image

9

10

[Attention]

When you purchase or charge from a charge empty state, 

there is no screen display even when charging is completed. 

Long press the MENU button (for about 2 seconds). The time 

is displayed.

* The time may not be correct.

* Perform Time setting. (page 12)

[How to Turn On Power]

Long press the MENU button (for about 2 seconds). The time 

is displayed.

* The time may not be correct.

Long press MENU 

(about 2 sec)

The time appears

The time appears

MENU 
button

* If "Charge required" is displayed while there is a residual 

amount of battery charge, or if charging is completed when 

the Receive ON while charging is set, then the letter of 

"Charging” disappears and the time will be displayed.

Power ON

* The setting menu is switched to

 Received history 

 Time setting 

 Alarm setting 

 Buzzer setting 

 Wireless setting 

 Display setting 

 Operation setting 

 Set while charging in that order. (When operating UP (

) button)

* Receives when a radio wave comes from the transmitter during setting.

How to Use 

 Received history

You can confirm what content was 
notified (received) at what time.
You can register up to 10 Received 
histories.

 Buzzer setting

You can set so as to allow the buzzer 
to be sounded when receiving or 
alarming.

ON 

 Buzzer mark lights up

Buzzer is sounded

OFF 

 Buzzer mark disappears

No buzzer is sounded

 Wireless setting

You can set so as not to receive even 
when a radio wave comes from the 
transmitter.

* When Wireless OFF appears, the 

antenna mark disappears.

* Only the Clock/Alarm clock functions 

can be used. Please be careful.

ON 

 Antenna mark appears

Receive

OFF 

 Antenna mark disappears

Do not receive

 Alarm setting

You can set the Alarm clock time. You 
can set to three alarms.

* Alarms 1/2 will not stop until you 

stop them by yourself.
Be sure to stop any of the four buttons 
by long pressing (about 2 seconds).

ON 

 Vibrates at the set time

OFF 

 Does not vibrate at the set time

 Time setting

You can set the current time.

 Display setting

You can set so as not to display the 
Normal screen.

* The clock/antenna mark/battery 

mark are not displayed.

* The light is put on.

* Displayed when receiving/charging.

* Displayed during various settings.

ON 

 Normal screen is displayed

OFF 

 Normal screen is not displayed.

  Operation setting

You can turn off the power of 
wristwatch receiver.

* If the Operation OFF is set, all of 

reception, alarm, etc. do not vibrate.

* Set when not using for a while.

* To turn on the power, long press 

(about 2 seconds) the MENU button.

OFF 

 Power OFF

 Set while charging

You can set so as not to receive a 
radio wave from the transmitter 
during charging.

ON 

 Receive

OFF 

 Do not receive

 Eco mode

Turn ON the Eco mode, put out the 
backlight, which is put on during reception 
ringing, to improve the battery life.

ON 

 Backlight is put out during 

reception ringing

OFF 

 Backlight is put on during 

reception ringing

Setting Menu

Inserting Charger

When inserting the AC adapter into the USB terminal of the 

charger, fit the both forms of the jack (A) on the charger and 

the plug (B) of the AC adapter correctly. A forceful insert can 

cause damage of the jack, so check the both forms carefully. 

(A) 

(B)

1 0   :   1 0

1 0   :   1 0

Charging

Received

history

Wireless

setting

Display

setting

Time

setting

Alarm

setting

Buzzer

setting

Set while

charging

Operation

setting

Eco mode

Содержание Silwatch















Отзывы: