background image

Indicating with vibration and characters

Indicating with vibration and characters

Indicating with vibration and characters

User’s Manual

TREMBLING

TREMBLING

TREMBLING

TREMBLING

TREMBLING

Tokyo Shinyu 

Co., Ltd.

Manufacturer & Sales

Shinjuku KM Bldg. 6F, 1-14-5 Shinjuku, Shinjuku-ku, Tokyo 160-0022, Japan

http://www.shinyu.co.jp/

E-mail : [email protected]

TEL 

+81-3-3358-8000

FAX 

+81-3-3358-6330 

Revised September 2019

2019

MODEL

Ver.1.0

SYSTEM

ONE-WAY

Communication

Japan Smart Energy Co., Ltd.

This CO

2

 reduction attestation was given after Japan Smart Energy Co., Ltd. examined and checked this printing system.

It has participated in the forest regeneration enterprise (3,000 trees in the quasi-national park) of Bali state in Indonesia through printing by MCP.

CO

2

 emissions

 of this printed matters 

was reduced by

17.85 kg

 by reusing the 1.76-kg aluminum plate which is

used in the printing process of Tokyo Shinyu Co., Ltd

Minus Carbon Printing Systems

The amount of CO

2

 reduction of 17.85 kg

Equals to CO

2

 quantity absorbed in one year by

about 1.28 trees of Japanese cedar of 50 years
of old (22 m in height and 26 cm in diameter).

(Source: Forestry white paper)

Height
22 m

Diameter
26 m

Содержание Silwatch















Отзывы: