14
INFORMATION ON THE AUTO-STOP VALVE
An auto-stop valve is equipped in this hoist.
When the DOWN button is pushed and the hoist lowers to its full extent, the auto-stop
valve will activate stopping the hoist from lowering any further.
Inorder to de-activate the auto-stop valve push the UP button.
△
！
WARNING ;
If the hoist moves in the UP direction when the DOWN button is pushed.
Immediately advise your dealer or distributor.
△
！
WARNING ;
This hoist has an overwind prevention device installed in the unit, but do not use
this mechanism to stop the hoist as a normal operation. This device was designed as an Emergency
stop feature and not for normal stopping of the hoist. As a result, if this device is used for normally
stopping, this will lead to the cause of wire damage or breakage, leading to the dropping of the load
and may lead to a human accident. When assembling the wire, make sure the lift has some allowance
in the up/down direction as a safety factor.
EMERGENCY BUTTON (Equipped with the TMM-140AE)
If the control of the lever on the operating handle is out of order in operation, push the
emergency stop button immediately to stop the operation.
Once push the red button, the operations stop. Turn the button clockwise to remove the
emergency stop.
△
！
WARNING ;
When using the , did not HIT the button.
Press the button with your finger
.
EMERGENCY BUTTON
Air & Allied Sales (Pacific) Pty Ltd
www.air-allied.com.au