Installing Clear Lens - Part# AV-LNS
Your fixture may have been provided with clear lens
covers. Push the lens directly over the top of the socket.
When properly seated between the two catches on the side
of the socket, the lens will be securely fastened and not
move from side to side.
WIRE
END VIEW
SIDE VIEW
WIRE
FOR SHIELD
Clear Lens
Catches secure
Clear Lens in place.
End View
Step 2: Installing Reflectors/LEDs/Lamps
Your fixture may have been provided with optional reflectors.
Symmetrical reflectors (#AVWH/BK-REF-S) must be
attached before lamps are installed. Push the plastic reflector
base directly over the socket until it is firmly seated in place.
Asymmetrical reflectors (#AVWH/BK-REF-A) may be
attached after lamps or LEDs have been installed.
Silver Reflector
Plastic Reflector Base
Advantage Socket
Installing Reflectors - Part # AVWH-REF-S (White) / Part #: AVBK-REF-S (Black)
Part# AVWH-REF-A (White) / Part# AVBK-REF-A (Black)
Installing LEDs or Lamps
1.
Push LED or Lamp into one
side of socket at an angle.
2. Push other side of LED or Lamp
straight down. Do Not Twist.
SOCKET
WIRE
WIRE
24/5
LAMP
SOCKET
WIRE
WIRE
24/5
LAMP
WIRE
WIRE
Lamp Replacement
1. Remove lamps from socket by pulling directly out (Do Not Twist).
2. Replace lamps only with the same or lower wattage lamp.
Advantage Instructions
Page 3
