Page 1-6
Document Ref 942005-001 Rev 2
TQP-HS for Fuel Dispensers
Component Technical Manual
SAFETY EQUIPMENT FOR WORKING IN HAZARDOUS AREAS
The following safety equipment is required for working in hazardous areas:-
•
Only spark free tools are permitted for work on dispensers.
•
Work on bearings is only permitted using the standard workshop tools authorised
for this kind of work.
•
The use of all electrical tools is strictly prohibited.
•
Only the use of explosion protected work lights is permitted.
•
The use of telecommunications equipment in hazardous areas is strictly prohibited.
SAFETY INSTRUCTIONS
The following safety instructions must be adhered to during installation and
maintenance procedures:-
•
Inhalation of petrol vapour must be avoided. Suitable precautions must be taken
and where necessary respirators used.
•
Avoid direct contact of fuel with the skin.
•
Use suitable protective clothing, protective gloves and/or protective hand cream.
•
Avoid fuel spills.
•
No smoking, no naked flames are permitted.
•
Long hair and ties can get caught in moving parts. Hair must be suitably covered.
1.6
Standards & Certificates
Tokheim TQP-HS pumping units are constructed in conformity with the requirements of
all the applicable European Directives (Machinery 2006/42/EC; EMC 89/336/EEC; ATEX
94/9/EC).
The TQP-HS, MID cert TC7186 fulfills the requirements as mentioned in Annex 1 and
Annex MI-005 of the Directive 2004/22/EC.
TQP-HS pumping units are incorporated into Tokheim fuel dispensers which conform to
the essential requirements of the Machinery Directive 2006/42/EC.
The components used within the TQP-HS are selected in accordance with the European
Standard EN BS 60079-0 (Electrical Apparatus for explosive gas atmospheres) and the
supplementary Standards listed therein.
The production and end test is controlled through the Quality Assurance systems within
the Tokheim Manufacturing Centres, and has received Quality Assurance Notification
from a Notified Body.
No modification to the component may be performed without express permission from
Tokheim and must always use original components or Tokheim retrofit kits. Failure to
comply with the above will invalidate product conformance with the relevant European
Directives and Tokheim will no longer accept product liability.
