2
Hold the stock pulley cage firmly in hand and
wiggle it out slowly. After 6mm (1/4”) of axial
movement, the spring tension is no longer
restrained. Carefully rotate the cage clockwise
to fully release the spring tension.
1
Remove the rear wheel. Disconnect the chain and
remove it from the bicycle. Shift the rear
derailleur to the lowest (largest) gear. Unscrew
the pulley cage fixing screw (facing the ground),
taking great care not to damage the bolt head
when unscrewing as the bolt may have strong
anti-loose compound on the thread.
Shuriken
Oversized Pulley System
TK1729S / TK1729R7
IMPORTANT NOTICE
-
Altering this product could degrade its performance and
cause unseen damage. Any modification to this product
will void the warranty.
-
Your local authorized TOKEN dealer should install,
service, and adjust to your Shuriken Oversized Pulley
system.
-
Follow these instructions carefully. If you have any
questions, contact us or your local TOKEN dealer.
-
Bolts should be tightened to specific torque – 3N.m for
pulley wheel mounting bolts (M5 alu-alloy) and 0.6N.m
for cage-bridge bolts (M3 steel).
COMPATIBILITY
-
Rear derailleur:
TK1729S - Shimano® R9100, R9150(elec.), R8000,
R8050(elec.)
TK1729R7 - Shimano® R7000
-
Drivetrain capacity: 16T(chainring) + 23T(cassette)
-
Largest (lowest) cog size: 34T
WARRANTY
-
This product is guaranteed against defects in material
or workmanship for five (5) years from the original date
of purchase. This warranty applies to the original owner
only and is non-transferable.
-
The warranty is considered void if resold.
-
The warranty does not cover normal wear and tear or
damage from abuse.
-
Please see our website or contact your local dealer or
distributor for more details.
www.tokenproducts.com
Rev-1.3, 2022-Feb
