Tokai TC-135K, Руководство пользователя

Страница: 11 / 42

11
PRECAUTIONS FOR USE
1. No naked flame sources, such as lighted candles, should be placed on the
apparatus.
2. Do not place the product in closed bookcases or racks without proper
ventilation.
3. Where the mains plug is used as the disconnect device, the disconnect
device shall remain readily operable.
4. The ventilation should not be impeded by covering the ventilation openings
with items, such as newspapers, table-cloths, curtains, etc.
5. It shall not be exposed to dripping or splashing and that no objects filled with
liquids, such as vases, shall be placed on the apparatus.
6. Do not connect FM antenna to outside antenna.
7. The unit should not be exposed to direct sunlight, very high or low
temperature, moisture, vibrations or placed in dusty environment.
8. Do not use abrasive, benzene, thinner or other solvents to clean the surface
of the unit. To clean, wipe it will mild non-abrasive detergent solution and
clean soft cloth.
9. Never attempt to insert wires, pins or other such objects into the vents or
opening of the unit.
10. Disconnect device warning: Mains plug is used as the connection, so it
should always remain ready operate.
11. Batteries shall not be exposed to excessive heat such as sunshine, fire or
the like.
POWER SUPPLY & BATTERY BACK-UP SYSTEM
CONNECTING AC POWER
• Plug the AC power cord to a household outlet AC source.
BATTERY BACK-UP
• This unit is equipped with a battery back-up system, it requires a 3V CR2032
flat lithium battery (not included).
• Open the battery compartment by unscrewing the lid with a small
screwdriver.
• Insert the battery in the battery compartment, making certain that
the positive and negative (+ and -) battery terminals are attached to the
corresponding terminals on the plate in the battery compartment.
• Screw the lid of the battery compartment to close.
Note : If an AC power failure occurs, the clock automatically switches to the
battery power supply, the clock and timer memory continue running. When the
AC power resumes, the clock switches back to AC again.