Tokai TB-207, Руководство пользователя

Страница: 11 / 32

10
CD /MP3 OPERATION
1. Insert the main plug into a main supply power outlet.
2. To open the CD door by lifting the OPEN/CLOSE area
near the CD door. Insert disc into the disc compartment
with the title side upwards.
3. Close the CD door, select the FUNCTION switch to
CD/USB position, and press STANDBY button once to
turn on your unit, “- - -’’ is displayed for few seconds,
and total number of tracks will show on the LCD display.
4. Press the PLAY/PAUSE button to play the CD.
5. Press SKIP / buttons to jump to next or previous
track.
6. Press and hold SKIP / buttons to search rapidly
within a track to locate a specific passage.
7. During CD play, press the PLAY/PAUSE button to
pause CD playing and press again resume.
8. During playback, press the 10+ / button to
skip up by 10 tracks if destination track is inside the
folder. Press and hold the 10+ / button for
more than 1 sec. to skip to next folder.
9. Press the STOP button to stop the CD playing.
10. After all tracks have been played, the CD player will stop
automatically.
11. To turn the unit to standby mode, press the STANDBY
button once and then STANDBY indicator will light
to half brightness.
12. To power off the unit, select the FUNCTION switch to
OFF position. If the unit had been turned to standby
mode, then the STANDBY indicator goes out.
NOTES : Do not open the CD compartment while the disc is
playing or rotating.
USB OPERATION
1. Insert the main plug into a main supply power outlet.
2. Plug the USB flash drive into the USB socket. Slide the
FUNCTION switch to CD/USB position and press
STANDBY button once to turn on your unit.
3. Press and hold the CD/USB button for more than 1 sec.
to select USB operation, “- - -’’ is displayed for few
seconds, and total number of tracks will show on the LCD
display.
4. Press the PLAY/PAUSE button to play the USB.
5. Press SKIP / buttons to jump to next or previous
track.
6. Press and hold SKIP / buttons to search rapidly
within a track to locate a specific passage.
7. During USB play, press the PLAY/PAUSE button to
pause USB playing and press again resume.
8. During playback, press the 10+ / button to
skip up by 10 tracks if destination track is inside the
folder. Press and hold the 10+ / button for
more than 1 sec. to skip to next folder.
9. Press the STOP button to stop the USB playing.
10. After all tracks have been played, the USB player will
stop automatically.
11. To turn the unit to standby mode, press the STANDBY
button once and then STANDBY indicator will light to
half brightness.
12. To power off the unit, select the FUNCTION switch to
OFF position. If the unit had been turned to standby
mode, then the STANDBY indicator light turns off.
REPETITION FUNCTION (IN CD/MP3 or USB MODE)
To repeat one track on music CD / MP3 disc or USB
1. During CD/MP3 disc or USB playback, press SKIP 
/

buttons to select a track you wish to repeat.
2. Press PROGRAM / REPEAT button once and “ REP ”
indicator shows on LCD display. The unit will play repeatedly
the desired track.
3. To cancel the setting, press the PROGRAM / REPEAT
button continuously until the “REP” “REP ALBUM” “REP
ALL” indicators disappear.
To repeat the Entire CD / MP3 disc or USB
1. During CD/MP3 disc or USB playback, press the
PROGRAM /REPEAT button continuously until the “ REP
ALL ” indicator shows on LCD display. The unit will play all
tracks on the disc or flash driver repeatedly.
2. To cancel the setting, press the PROGRAM / REPEAT
button continuously until the “ REP” “REP ALBUM” “REP
ALL” indicators disappear.
To repeat ALBUM for MP3 disc or USB
1. During MP3 disc or USB playback, press the PROGRAM /
REPEAT button continuously until the “REP ALBUM”
indicator shows on LCD display. The unit will play all
tracks inside the desired folder (album) repeatedly.
2. To cancel the setting, press the PROGRAM / REPEAT
button continuously until the “REP” “REP ALBUM” “REP
ALL” indicators disappear.
NOTES : Repeat album function cannot support normal music
CD. This function is for MP3 disc format only.