Tokai LAR-82B, Руководство пользователя

Страница: 16 / 42

15
LOUD ON/OFF, EQ OFF (CLASSIC, POP, ROCK), DX, STEREO/MONO, TA ON/OFF, AREA EUROPE/USA. In each mode the
waiting time is 2 seconds and when the waiting time is over, it will return to the last display mode.
6. DISPLAY AND SETTING THE CLOCK
1) Press and hold SEL button to display time on the LCD
2) The press and hold SEL button again until the time flashes on the LCD. Turn the VOL knob to adjust the HOUR and
biefly press SEL button to change the position to adjust the MINUTE. Press and hold SEL button to confirm the
setting.
7. LCD DISPLAY
Press DIM button to adjust the background dark ou bright.
8. RESET
Before operating the unit for the first time, or after replacing the car battery or changing the connections, you must
reset the unit. Press this button with a cuspidal object. This operation will erase the clock setting and some stored
contents.
6. RADIO OPERATION
1. To select radio band
Press BAND button briefly and repeatedly to select a desired radio band in sequence and circulation as follows:
-->FM1-->FM2-->FM3-->MW1-->MW2->
2. To search for radio station manually or automatically
Press >>| or |<< button briefly to automatically tune up/down for a radio station with a strong signal.
Press and hold >>| or |<< button for 1 seconds switch to MANUAL seeking mode, then Press >>| or |<< button briefly
to manually tune up/down for your desired radio stations step bystep.
It will automatically switch to AUTO mode if no operation was done in about 3 seconds in the MANUAL seeking mode.
3. To store current station or turn on a preset one
1. Press one of the 6 number buttons and hold for more than 1 second to store the current station in the preset
memory bank of the number button for the current band. In this way the unit can store 30 preset stations.
2. Press one of the 6 number buttons briefly to turn on the preset station stored in the preset memory bank of the
number button for the current band.
4. To scan for each preset station or auto search for the strongest stations
When pressing and holding BND button for more than 1 second, the radio searches from the current frequency and
checks the signal strength level until the 6 strongest stations are found. And then the 6 strongest stations are preset
to the corresponding preset memory numbered bank. The auto-storage operation is implemented in the each
selected band. When the auto-storage operation is finished, the radio executes Preset scan.
5. AF [ALTERNATIVE FREQUENCIES] BUTTON
When pressed briefly, AF switching mode is selected and the state of AF switching mode is displayed by AF segment
in display.
Segment off: AF switching mode off.