EN-3
OPERATION
1. POWER ON/OFF / MUTE (MU)
Press and hold this key to switch the unit on and off. Also this unit can be turned on by pressing any key.
If you just press this key briefly, it will turn to MUTE. To return to sound, press it briefly again.
2. SELECT
3. VOLUME UP/DOWN
Turning the VOL knob Right or Left (3), you can adjust VOL/BASS/TREB/BAL/FAD. To select other functions,
press the “SEL” button shortly until the desired functions is shown on the display. Figure 1 shows how control
functions are selected using the “VOL” knob.
1
3
2
4
2
5
2
6
2
2
Fig. 1 Selection of sound control functions
1. VOL 2. SEL 3. BAS 4. TRE 5. BAL 6. FAD
Turning the VOL knob Right or Left. Increase or decrease the volume by turning
VOL
VOL
or
VOL
VOL
. These buttons
can be used to adjust the BASS, TREBLE, BALANCE and FADER.
CALL LIST
SEL
2 sec.
SEL
DISP
SEL
IN VOL
SEL
ADJ
SEL
PTY OFF
SEL
DSP NONE
SEL
TA VOL
SEL
TA OFF
SEL
EON ON
SEL
AF ON
SEL
TA ALARM
SEL
RETUNE L
SEL
MASK DPI
SEL
PI MUTE
Press and hold
SEL
button to adjust CALL LIST/DISPLAY/INITIAL VOLUME/ADJUST TIME/TA VOLUME/EON/
ALTERNATIVE FREQUENCIES/TRAFFIC ANNOUNCEMENT/PROGRAM TYPE/DSP SOUND/TA ALARM/
PI MUTE/RETUNE/ MASK DPI
CALL LIST
(see page 6)
DISPLAY
Display informations such as radio frequencies, clock, track and other informations depending on the playing
MODE.
IN VOL
Turn VOL knob to adjust Initial Volume level using this mode.
ADJ
Can adjust clock time. Turn
VOL
knob clockwise to set hours and counter clockwise to set minutes.
TA VOL
Turn VOL knob to adjust TA Volume (The volume level when Traffic announcement is transmitted).
EON
Turn VOL knob to select EON condition, ON or OFF.
USING THE RDS FUNCTION
What is RDS?
The RDS (Radio Data System) is a digital information system developed by the EBU (European Broadcast Union).
Piggy-backed on normal FM broadcasts, RDS offers a variety of information services and automatic retuning func-
tions for RDS-compatible car stereos.
In 1988, RDS became available in the United Kingdom, France, West Germany, Ireland and Sweden. Test trans-
missions are being conducted in many other European countries. It is expected that RDS will be available in most
western European countries in the near future.
‘AF/REG’ function (ALTERNATIVE FREQUENCIES)
When AF/REG mode is selected, the radio checks the signal strength of the AF all the time.
– Regional mode ON:
AF switching or PI SEEK is implemented to the station which have all PI codes same as current station. REG
segment is turned on, in LCD display.
– Regional mode OFF
The regional code in the format of PI code is ignored when AF switching or PI SEEK is implemented.
‘TA’ function (TRAFFIC ANNOUNCEMENT)
When pressed momentarily, it is activated as TA mode on or off
When TA mode is on and traffic announcement is transmitted
– When the unit is in CD/MP3 mode, it will switch to radio mode temporarily.
– If the volume level was under the threshold point, it will be raised to the threshold point.
– When TP station is received, TP segment is turned on in LCD display.
