Tokai LAR-354B, Руководство пользователя

Страница: 29 / 37

29
6. BLUETOOTH OPERATION
1. Pairing
Activate the Bluetooth mode of your mobile phone, and then select the function for Finding Bluetooth Device
and enter it.
If necessary to do so, refer to the user manual of your mobile phone.
After finishing finding, it will
show the name of Bluetooth Device TOKAI_BT if found, select it and enter it, then it will show an interface
that asks you to input password. Input the password 0000 and enter it. When pairing is successfully
completed “
CONNECT ”
is displayed on LCD .
2. Connection or disconnection
A) Use mobile phone to do connection or disconnection
1) In connection status, find the paired and connected Bluetooth Device, and then press the
disconnection button to do disconnection.
2) In disconnection status, find the paired and disconnected Bluetooth Device, then press the connection
button to do connection.
B) When powering on (after the car switched off), the unit will search for mobile phone, pair and connect.
This will take about 10-15 seconds.
Note:
(1) Bluetooth icon appears on LCD only when in connection status.
(2) In connection status: Mobile phone transfers to car audio player whenever a call takes place; Mobile
phone transfers to car audio player whenever receiving a call.
3. Calling when in connection status
To make a call simply press the button, CALL is displayed on LCD.
Input the telephone numbers by using the mobile phone & press again. During the call, le calling time
is displayed on LCD. To end the call, press button.
To redial, press , the last call number is displayed on the LCD, press again to call.
4. Accept/ Reject/ End Call
A) During ringing, press button to accept the call.
B) During ringing, press button to reject the call.
C) During talking, press button to end the call.
This operation works at BT mode & also BT Android mode. During ringing, PHONE is displayed on LCD and then
the phone number. During talking, talking time is displayed on LCD.
5. Volume level setting calling
While talking, use volume control to adjust volume level, but this volume level cannot be saved.
6. Calling or receiving calls while the unit is in sleep mode
When the unit is in standby mode and you make or receive a call, it will power on automatically. Once the call
is completed, the unit returns to standby mode.
7. AVRCP & A2DP MODE
To transfer the audio of a file played by Mobile Phone to the Car Audio Player If the mobile phone supports
A2DP and could play audio files, when the Mobile Phone plays an audio file(For some Mobile Phones, you
must first select Play by BT ), the playback will be transferred to the Car Audio Player.
In A2DP mode, if the Bluetooth device of the Mobile Phone supports AVRCP , the functions of the
9
/
:
and
PLAY/PAUSE buttons are the same as one in media mode (no fast forward/backward functions for the
9
/
:
buttons). The other buttons normally available in media mode are not available.
PDF created with FinePrint pdfFactory Pro trial version http://www.pdffactory.com