EN-19
DSP
Turn VOL knob to select DSP mode (Classic, POP, Rock, Flat)
TA ALARM/SEEK
TA SEEK mode:
When newly turned station does not receive TP information for 5 sec., the radio retunes to next station which has
not the same station (PI) as the last station, but has the TP information.
In TA seek mode, the current station can be changed to the completely different station because the unit searches
TP station when the field strength of the current station is very weak, or the current station has no TP signal.
TA ALARM mode:
Any automatic retune mode is not activated, just can hear Beep sound.
PI MUTE/SOUND
Action when 2 stations with different programme identification (PI) codes are on the same frequency:
SOUND:
The radio switches to the new channel for a few seconds and then switches back again
MUTE:
The radio is muted
RETUNE L/S
RETUNE L:
Select 90 seconds as the initial time of automatic TA search.
RETUNE S:
Select 30 seconds as initial time.
MASK DPI/ALL
MASK DPI:
masked only the AF which has different PI.
MASK ALL:
masked the AF which has different PI and NO RDS signal with field strength.
4. PRESET STATIONS (1,2,3,4,5,6)
Six numbered preset buttons store and recall stations for each band.
Storing a station:
1. Select a band (if needed)
2. Select a station
3. Hold a preset button longer than one second. Preset station number appears in the display when station is
saved.
Recall a station:
1. Select band (if needed)
2. Press a preset button for less than one second to select stored station.
Note:
This unit is equipped with built-in memory I.C. (Integrated Circuits) to save user settings such as tuner
preset stations and audio control settings. To cancel these settings, switch to Radio mode, press and hold button
“1”
for 2 seconds (do not release button) followed by pressing
MD
button. Unit will automatically restart after 5
seconds.
5. ‘AF/REG’ function (ALTERNATIVE FREQUENCIES)
Operation: See the SEL button of the ‘AF/REG’ function (ALTERNATIVE FREQUENCIES) section.
6. ‘TA’ function (TRAFFIC ANNOUNCEMENT)
Operation: See the SEL button of the ‘TA’ function (TRAFFIC ANNOUNCEMENT) section
7. ‘PTY’ function (PROGRAM TYPE)
Operation: See the SEL button of the ‘PTY’ function (PROGRAM TYPE) section
8. EQUALIZER (DSP)
Press DSP to select between (Classic, Rock, POP, Flat) equalizer modes.
9. MODE/LOUDNESS BUTTON (MD)
By pressing this key, user can select. AUX/TUNER/USB/SD/A2DP mode.
LOUDNESS:
By pressing this key longer than 2 sec., you can select LOUDNESS mode.
10. BAND BUTTON (BD)
Each band is toggled cyclically by pressing this key FM1---FM2---FM3---MW(AM)1---MW(AM)2.
11. AUTOMATIC OR MANUAL TUNING (FREQ UP
OR FREQ DOWN
)
(A) RADIO MODE
When pressed momentarily, these keys are operated as SEEK tuning mode.
When pressed longer than 1 sec., they are operated as MANUAL tuning mode.
(B) MP3/WMA PLAYER MODE
When pressed momentarily, they are operated as TRACK UP or TRACK DOWN mode.
When pressed longer than 1 sec., they are operated as CUE or REVIEW mode.
12. OPEN/CLOSE UPPER PANEL DISPLAY
Press the
OPEN button for hold the mobile phone.
13. UPPER PANEL DISPLAY TILT ANGLE
Press
TILT
button repeatedly to choose the desired tilt angle.
Содержание LAR-100B
Страница 26: ...www tokai fr LAR 100B R...
