2
Modular Conversoin Receiver Model: R-CM
To customers:
Before using this product, please read this operating instruction carefully to use it properly.
If you have any question, please contact your nearest distributor or Tohnichi Mfg. Co., Ltd.
This operating instruction should be stored in a safe place.
Safety symbol
This symbol indicates attention is required for your safety. When this symbol appears in this
instrution, pay particular attention for your safety concerns. Take preventative measures
according to the written message for appropriate operation and management.
！
Signal Words
A signal word accompanies the safety symbol, which indicates the level of cautions on safety of people and
the appropriate use of the equipment. Signal words are classified into 3 levels: "danger", "warning " and
"caution" by the degree of risk.
"
Danger
":
Imminent danger which may cause serious damage
"
Warning
":
Potential danger which may cause serious damage
"
Caution
":
Potential danger which hinder ordinary operation but may not lead to serious damage.
！
！
！
Warning
！
● The power supply voltage of this product can be used only for DC18V to 36V described in this
instruction manual.
● Do not drop water or oil on this instrument
Do not use this instrument in an atmosphere of flammable gas and steam.
Use in such an atmosphere may result in fire.
● Avoid shock or vibration to this instrument. It may cause a damage or failure.
● Before use, make a pre-operation inspection and check the settings.
● Avoid using the instrument in a place where there are metal structures around it.
● Do not install the antenna for the receiver close to any metal pole, electric wire, iron piping, etc.
* Especially, if the antenna and piping are positioned in parallel, the communication status may be
worsened.
● Avoid using the instrument near welding machines, electric discharge machines or machines producing
electromagnetic noise such as PC.
● Before wiring, check that the power of the device to be connected to the receiver is in the OFF
position.
● Should this instrument give out abnormal smell or catch fire during use, stop using it immediately and
remove the AC adapter
from the outlet. Then, move the instrument to a safe place and contact Tonichi Mfg. Co., Ltd.
● Do not disassemble or modify this product. It may result in loss of safety, it may be punished by law.
Safety Precautions
